Festool 576799 LR 32-SYS Hole Drilling Set
for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400 in the FS-LR 32 hole drilling system

Contains
Guide plate FP-LR 32
centring mandrel
Hinge location cutter HW S8 D35
Through-hole drill HW S8 D5/30
Dowel drill HW S8 D5/30 Z
Parallel side fence SA-LR 32
Fastening clamp FSZ 120
Longitudinal stop screwdriver, WAF 5
Systainer³ SYS3 M 112

Holes in series.
Hole series are always drilled with a spacing of 32 mm and a hole diameter of 5 mm or 3 mm. The hole series drilling system is a complete set for fast and simple production of series of holes for shelf supports, rear wall supports and fittings with the OF 1010 or OF 1400 router. Everything in a single Systainer.
Everything that you need for a series of holes at hand in one Systainer
With the LR 32 system – comprising the guide rail FS 1400/2-LR 32 or FS 2424/2-LR 32 and the hole drilling system – precise rows of holes spaced 32 mm apart can be drilled with the Festool router
The LR 32 guide rail is aligned quickly and parallel to the two side stops, which are positioned by means of an adjustable stop at the workpiece and guide rail
The guide rail is precisely positioned with 9, 5, 16 or 32 mm edge clearance over the stopper in the longitudinal direction
Centring mandrel for perfect centring of the router on the guide plate
Spring-loaded positioning rocker for effective operation when drilling the hole series
Perfectly guided through fine adjustment of the guide play and additional handle on the guide plate
Properly secured thanks to the supplied guide rail clamps
The most important hinge location cutters are already included in the set
for use with hole line guide rails