Festool 500366 Perforated Top LP-KA65 MFT/3

Perfectly prepared cut-out for the AP-KA 65 adapter plate
Sliding strip can be used flexibly due to M4 threaded sockets
Especially steady thanks to the use of a three-layer MDF panel
Can be easily replaced by the standard perforated board when MFT is present

Perforated board with cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the AP-KA 65 adapter plate. For small batches, straight edges, freeform elements and gluing inclined edges, angle of 0–47°. Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings.

Product strengths
Can be easily replaced by the standard perforated board when MFT is present
Especially steady thanks to the use of a three-layer MDF panel
Perfectly prepared cut-out for the AP-KA 65 adapter plate
Sliding strip can be used flexibly due to M4 threaded sockets

Areas of application
For small batches, straight edges, free form elements and gluing inclined edges, angle from 0-47°
Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings
With cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the adapter plate AP-KA 65

Technical data
Dimensions length x width
1 102 x 718 mm